桂林康密劳铁合金有限公司成立于2002年9月30日，坐落于广西省桂林市广西省桂林市灵川县三街镇工业园，是埃赫曼集团在中国的全资子公司，主要致力于高碳、中碳、低碳锰铁和锰硅合金等多品种锰系合金的生产。是国内主要的锰合金生产企业之一。
工厂占地772.1亩，于2009年6月开工，2012年7月建成投产。
工厂共建有2x25.5MVA全封闭式矿热炉，2x25.5MVA半封闭式矿热炉；1x6.3MVA固定式精炼电炉，1x6.3MVA倾动式精炼电炉，2x10m3精炼摇包；1x24M2带式锰矿烧结机生产线；1x4.5MW余热发电机组；1xΦ2.8x46m回转窑活性石灰生产线；1xΦ2.4x16m转筒矿石干燥机，以及原料处理、供配电、给排水、铁路专用线、220kv供电专用线路、环保设施及余热回收装置等公辅设施。各生产线都经过生产验证，各项技术指标达到或超过设计水平。
环保投入10680万元，占总投资11.5%。其中除尘装置23套，涵盖原料处理、配料上料、铁合金冶炼、烧结、石灰回转窑、成品加工等整个工艺流程。大气排放含尘浓度按≤20mg/m3设计，大大优于国家标准。除尘灰被全部回收烧结重复利用。2015年通过项目竣工环保复评。
水循环系统装置9套，全部工业用水循环使用，做到工业和生活用水零排放，水重复使用率达到98%。矿热炉煤气和高温烟气余热回收，用于矿石烘干、原料烧结、余热发电。
本公司设计产品为一车间年产高碳锰铁和商品锰硅合金分别为5万吨和3.4万吨；二车间为高附加值的中低碳锰铁和高硅硅锰，年产量分别为5万吨左右；如满负荷生产，实际年总产量可达到16万吨锰系合金产品。曾服务的主要客户有中信泰富特钢集团、马钢股份、河北钢铁集团、武汉钢铁集团等国内主要大型钢铁企业。
如您对我公司工厂或资产设备（包括专业设备和通用设备）感兴趣的，欢迎垂询并实地考察，联系方式：021-61006161分机6073联系人：杨嘉，如您需要详细的设备资产清单可与我公司联系索取。
Guilin Comilog Ferroalloy Co., Ltd., incorporated on Sept. 30, 2002, located at Sanjie Town, Linchuan County, Guilin, is a wholly owned subsidiary of Eramet Group in China, and it is mainly engaged in production of various manganese alloys like high-carbon, middle-carbon and low-carbon ferromanganese and silico-manganese, etc. It is one of the major carbon ferromanganese production facilities in China.
The factory covers an area of 772.1Mu. The plant construction commenced in June 2009, and was completed and put into product in July 2012.
The factory covered 2x25.5MVA closed electric smelting furnace, 2x25.5MVA semi-closed electric smelting furnace, 1x6.3MVA fix refining electric furnace, 1x6.3MVA tilting refining electric furnace, 2 x 10m3 refining shaking ladle, 1x24M2 draper-type sintering product line, 1x4.5MW heat recovery and electricity generation system, 1xΦ2.8x46m lime rotating furnace, 1xΦ2.4x16m drum drier of ore and such public auxiliary facilities for raw materials processing, power supply and distribution, water supply and sewerage, dedicated railway lines, dedicated power line of 220kv, environmental protection and waste heat recovery, etc. Each production line is production-proven and all the technical indicators have reached or exceeded the design level.
The environmental protection investment was RMB106.8million, accounting for 11.5% of the total investment. There were 23 sets of dust removal plants, covering the entire process flows including raw materials treatment, blending and feeding, ferroalloy smelting, sintering, lime rotating furnace, processing of finished products, etc. The atmospheric emission dust concentration was designed as per ≤20mg/m3, greatly higher than the national standards. The dust removal ashes are recovered and sintered for recycling. The company passed the environmental re-evaluation in 2015.
There are 9 sets of water circulating systems, realizing circulating use of industrial water, thus ensuring zero discharge of industrial and domestic water, with the water recycling rate up to 98%. The waste heat from the coal gas and high-temperature stack gas are recovered for drying of ores, sintering of raw materials and power generation.
The company designs products for HC FeMn with capacity 50K tons per year and commercial SiMn with capacity 34K tons per year in first workshop, for the middle and low carbon FeMn and high silicon-manganese with high added value with capacity 50K tons each per year in second workshop. The actual annual output of manganese alloys can be increased up to 160,000T as full production. The main customers including some large-scale steel enterprises like CITIC Pacific Special Steel Group, MA Steel, HBIS, WISCO, etc.
Welcome to your inquiries and onsite studies if interested by the acquisition of the company or the manufacturing plant (including production and auxiliary equipment). The contact window is Gemma Yang. Tel: 021-61006161 ext6073.
A more detailed list of equipment and assets available on demand.
（Mysteel.com 合金资讯部编辑请勿转载）